Products
The equipment is commonly used as a reaction tank in industries such as pharmaceuticals, chemicals, and bioengineering. Structural features: 1. The device mainly consists of three parts: the cylinder, the jacket, and the outer shell. The space between the outer shell and the jacket is filled with high-density insulation material, and the top of the tank is equipped with a stirrer. 2. The pressure inside the jacket is determined according to customer requirements. 3. All materials are high-quality stainless steel. Overview: This series of containers is suitable for reactions in the chemical and pharmaceutical industries. The tank body can be made with honeycomb jackets, coil jackets, or integral jackets, and can be heated or cooled. The inner surface of the tank body is mechanically polished to a mirror finish, and the end caps are made by molding or spinning. All pipe openings and dead corners use R rounded transitions.
Overview: The crystallization tank is made of imported 316L or 304 stainless steel. The inner wall is polished to a mirror finish or mechanically polished, while the outer wall features a fully welded 304 insulated structure, with the outer surface treated to a mirror or matte finish. The crystallization tank can withstand high-temperature sterilization at 121°C. It is equipped with multiple process interfaces including a thermometer, pressure gauge, spotlight sight glass, CIP cleaning ball, breather, nitrogen inlet, and material inlet and outlet. The shaft seal uses high-quality sanitary mechanical seals to ensure that the material is not contaminated. A sterile sampling valve and stainless steel tank bottom can be equipped according to customer requirements. The crystallization tank can use a variable frequency speed control device. The agitator can be of anchor type, frame type, paddle type, or turbine type.
This structure consists of an upper and lower elliptical head combined with a sandwich jacket, equipped with a magnetic stirrer that has been meticulously developed by the company over many years. The design of the stirring blades is unique and suitable for mixing different media. The supporting sliding bearings of this stirrer are made of hard alloy, featuring advantages such as simple structure, corrosion resistance, wear resistance, no leakage, and minimal dead corners. It has a long service life and fully complies with GMP requirements.
1、本系列容器具有加热和保温功能,按(钢制焊接容器技术条件)进行制造、试压和验收。2、容积有100L~1000L各种规格,供您选用,也可根据您的实际需要进行设计、加工。3、搅拌轴的密封采用进口卫生级机械密封,减速机选用世界著名品牌德国弗兰德或SEW,搅拌转速为36-53转/分。也可采用变频调速器控制。4、接口采用国际通用ISO标准快装卡盘式,内胆选用进口316L或304。5、罐体有液位计(雷达、超