Products
Overview: The crystallization tank is made of imported 316L or 304 stainless steel. The inner wall is polished to a mirror finish or mechanically polished, while the outer wall features a fully welded 304 insulated structure, with the outer surface treated to a mirror or matte finish. The crystallization tank can withstand high-temperature sterilization at 121°C. It is equipped with multiple process interfaces including a thermometer, pressure gauge, spotlight sight glass, CIP cleaning ball, breather, nitrogen inlet, and material inlet and outlet. The shaft seal uses high-quality sanitary mechanical seals to ensure that the material is not contaminated. A sterile sampling valve and stainless steel tank bottom can be equipped according to customer requirements. The crystallization tank can use a variable frequency speed control device. The agitator can be of anchor type, frame type, paddle type, or turbine type.
This structure consists of an upper and lower elliptical head combined with a sandwich jacket, equipped with a magnetic stirrer that has been meticulously developed by the company over many years. The design of the stirring blades is unique and suitable for mixing different media. The supporting sliding bearings of this stirrer are made of hard alloy, featuring advantages such as simple structure, corrosion resistance, wear resistance, no leakage, and minimal dead corners. It has a long service life and fully complies with GMP requirements.
1、本系列容器具有加热和保温功能，按(钢制焊接容器技术条件)进行制造、试压和验收。2、容积有100L~1000L各种规格，供您选用，也可根据您的实际需要进行设计、加工。3、搅拌轴的密封采用进口卫生级机械密封，减速机选用世界著名品牌德国弗兰德或SEW,搅拌转速为36-53转/分。也可采用变频调速器控制。4、接口采用国际通用ISO标准快装卡盘式，内胆选用进口316L或304。5、罐体有液位计(雷达、超
CXZ Fully Automatic Chromatography Separation Machine Set
The composition and characteristics of the system: The automated control system is based on an advanced DCS (Distributed Control System) control strategy, designed for a chromatography workstation that enables control and data acquisition for pumps, valves, and various online detectors. It facilitates easy execution of multi-column series and parallel operations, ensuring the stability and accuracy of the process. The specialized online detection system for traditional Chinese medicine includes the detection of conventional process parameters such as flow rate, pressure, temperature, pH value (optional), and conductivity (optional), as well as real-time detection of the content of effective components (or ingredients) in traditional Chinese medicine using UV spectroscopy (optional) and near-infrared spectroscopy (optional). The design of the chromatography column structure is well thought out and reasonable.
An overview of commonly used continuous extraction towers includes the following types: The packed extraction tower is a widely used extraction device in petroleum refining, chemical industry, and environmental protection sectors. It features a simple structure, ease of installation, and manufacturing. The role of the packing inside the tower is to increase the contact area between the two materials, allowing for sufficient interaction. This enables the dispersed phase droplets to continuously break and coalesce, renewing the surface of the droplets, and also reduces the axial mixing of the continuous phase. In a typical packed extraction tower, the two phases flow in opposite directions relying on density differences, with relatively low relative velocity and low turbulence at the interface, which limits the further increase of mass transfer rates.
This device is suitable for alcohol recovery in industries such as pharmaceuticals, food, light industry, and chemicals, which helps reduce production costs and improve economic benefits. The device can distill 30-50% of diluted alcohol to 90-95%. If a higher purity of finished alcohol is required, the reflux ratio can be increased, but this will correspondingly reduce the yield of the finished product. The residual liquid discharge has an alcohol content of ≤3°, making it a professional device for alcohol recovery.
Device Features: This device uses high-efficiency ceramic or stainless steel corrugated packing. All parts that come into contact with alcohol, such as the tower body, condenser, pressure stabilizing tank, and cooling coil, are made of stainless steel to ensure that the finished alcohol is not contaminated. The tower kettle uses a detachable U-shaped tube for easy maintenance.
No.7, Tianhe Road, Yuhang Economic Development Zone, Hangzhou
All rights reserved© Zhejiang shuang zi Intelligent Equipment Co., Ltd. |SEO Tags | Business License